Why Rent ARS Technologies Mixing / Injection Plant?

Higher Strengths

High shear colloidal mixing action allows for lower water/media ratios. This results in grout with higher strengths than those produced by conventional methods.

Minimal Bleed

The combination of low water/media ratios along with aggressive mixing ensures that more water is absorbed by hydration. Every particle of material is thoroughly wetted and separated.

Minimal Dilution

Colloidally mixed materials suffer minimal dilution in groundwater. This is and advantage in highly saturated ground conditions.

Rapid Mixing

Vortex action inside the mixing tank rapidly assimilates materials into the mixer which results in shorter batching times. Through-put exceeds that of other mixing methods.

High Shear

1800 rpm vertical mills ensure a high rate of shear and mixes that are stable and fluid enough to be pumped over long distances. The high shear feature also ensures that materials will permeate uniformly into voids.

Cost Savings

The combined effect of highly-efficient mixing and the ability to mix lower water/cement ratios allows for reductions in the cement content to achieve the desired strength requirement. Cement may be replaced by less costly filler like sand or fly ash.

High Production

The combination of rapid mixing and automated operation result in higher production rate. Depending on media, production rate can be up to 10,000 lb/hr.

Competent Crew

Capable, safety-conscious crews with access to highly qualified, accessible technical services.